How May I help you?
Fill in your details below, and we’ll be in touch with you soon.
Threaded Rod
Precision-threaded, load-tested your go-to for firm, flexible fastening.
Threaded Rod Manufacturer & Supplier in India
A threaded rod is a long metal bar threaded along its entire length, used to hang supports, join parts, and anchor fixings. Also called all-thread or stud rod, it works with nuts and washers at any point along its length, which makes it one of the most versatile fasteners in construction and industry. In MEP (mechanical, electrical, and plumbing) work, threaded rod hangs strut channel, pipe clamps, and hangers from ceilings and beams, while in structural and anchoring jobs it ties parts together or fixes them into concrete. It comes in many diameters and lengths, and in mild, high-tensile, and stainless steel grades with rust-resistant finishes. Ashish International is a threaded rod manufacturer and exporter based in Ludhiana, India, with over 25 years of experience producing rods and support fittings built to global quality standards. Choosing the right threaded rod keeps your supports strong, safe, and easy to install.
What is a threaded rod?
A threaded rod is a straight metal rod with a continuous thread (a spiral groove) running from one end to the other. Because it is a full threaded rod, a nut can be screwed on at any point, so it can be cut to length and used wherever support is needed. It is sometimes called all-thread, stud, or stud rod. The rod itself does nothing until it is paired with nuts and washers, which clamp parts together or hold a load. In support systems, threaded rod usually hangs down from a ceiling or beam to carry strut channel, pipes, or trays. You can see the full range of rods and fittings on the Ashish International products page. Threaded rod is valued because it is simple, strong, and easy to adjust on site. For example, a single threaded rod can be cut into several hangers, each tightened to the exact drop a pipe needs. A threaded rod is an all-thread metal bar that works with nuts and washers to hang or join loads.
What is a threaded rod used for?
Threaded rod is used across building and industrial work wherever something must be hung, joined, or anchored. Its most common job in MEP is as a ceiling threaded rod: it drops down from a slab or beam to support pipes, ducts, and cable trays, often carrying pipe hangers and clevis hangers at the bottom. It also hangs supports from steelwork when paired with a beam clamp, so no drilling of the beam is needed. Beyond hanging, threaded rod joins and clamps parts together in machines and frames, and acts as an anchor stud to fix equipment to concrete. Its full-length thread means the drop height can be set exactly and adjusted later. For example, a row of threaded rods can suspend a long pipe run from a ceiling at a perfectly level height. Threaded rod hangs pipes, ducts, and channel from ceilings and beams, and joins or anchors parts.
What sizes, lengths, and grades does threaded rod come in?
Threaded rod comes in a wide range of sizes, lengths, and steel grades to suit different loads. Diameter is set by the thread size, with common metric sizes including M6, M8, M10, M12, M16, and M20 the larger the diameter, the more weight the rod can carry. Rods are sold in standard lengths, often one, two, or three metres, and a long threaded rod can be cut down on site to the exact drop needed. Grade and material matter too: mild steel with a zinc or galvanized finish suits most general work, high-tensile grades handle heavier loads, and stainless steel is used for damp or corrosive sites. Ashish International produces threaded rod in a range of sizes, lengths, and finishes, with matching nuts, washers, and other industrial fasteners, and can supply custom-cut or special rods on request. Exact size and grade charts are available in the catalogue or on request. Threaded rod comes in many diameters, lengths, and grades, from mild steel to high-tensile and stainless.
What is the difference between threaded rod, anchor rod, and stud?
These terms are related and often overlap, but knowing the difference helps you order the right part. A threaded rod (all-thread) is threaded along its full length and is the most general-purpose option, used as a hanger, connector, or threaded rod fastener with nuts. A threaded anchor rod is a threaded rod used with an anchor to fix something into concrete or masonry — one end sits in the anchor, the other takes a nut; it is closely related to foundation and anchor bolts. A stud usually means a shorter threaded piece, sometimes threaded only at the ends rather than fully, used to join two parts. In practice, the same rod can serve several of these roles once cut and paired with the right fixings, such as a spring channel nut where it meets strut channel. For example, the same M10 rod can hang a pipe in one spot and anchor a bracket to concrete in another. Threaded rod is full-length thread; an anchor rod fixes into concrete; a stud is a shorter joining piece.
How to choose a threaded rod manufacturer and supplier?
Choosing the right threaded rod and a reliable maker keeps your supports safe and your project on track. Start with the diameter and grade: match the thread size and steel grade to the load, since a thin or low-grade rod can stretch or fail under weight. Next, choose the finish for the environment — galvanized mild steel for general use, or stainless steel for damp or corrosive sites. Then decide on length, remembering that a long rod can be cut to size on site. Quality is critical for load-bearing fasteners, so look for threaded rod manufacturers in India that run a certified, quality-controlled facility and back their products with proper quality assurance, so the thread is accurate and the steel is sound. A trusted threaded rod supplier should also offer matching nuts, washers, and fittings from one place. Finally, ask about custom lengths or white-label production for your own brand. For example, buying rod and nuts from the same maker ensures the threads match perfectly. Choose threaded rod by diameter, grade, finish, and a manufacturer with proven quality control.
Why choose Ashish International for threaded rod?
Ashish International has manufactured and exported threaded rod and MEP support systems for over 25 years, building products to the same standards expected from leading global brands with the shorter lead times and value of Indian manufacturing. The company produces rod in mild, high-tensile, and stainless steel grades, along with the full range of channel, clamps, hangers, and fasteners, so customers can source a complete support system rod plus cantilever arms, channel, and pipe clamps from one maker, with everything guaranteed to fit. Its in-house manufacturing keeps quality tight and handles both bulk and urgent requirements. Ashish International also offers white-label and OEM production, making threaded rod to a client’s own size, length, and brand under strict NDA a service trusted by many long-standing customers, several with more than 20 years of association. Its products are also sold under its own brand, FITSTRUTS®. With exports to Europe, the UK, the USA, Australia, the Middle East, and beyond, the company pairs global quality with competitive Indian pricing. Learn more about Ashish International and its experience. Ashish International offers global-standard threaded rod, a fully matched support range, and trusted white-label manufacturing.
Need threaded rod in the right size, grade, and length for your project? Ashish International manufactures all-thread rod in mild, high-tensile, and stainless steel, with custom lengths and white-label options. Contact our team and request a quote today call +91-99888-54380 or email ashishint2001@gmail.com.
Frequently Asked Questions
Q1: What is a threaded rod used for?
Threaded rod is used to suspend pipes, ducts, cable trays, and strut channels from ceilings and beams. It is also commonly used to join components or anchor equipment to concrete. Its continuous threading allows it to be cut to the required length and adjusted easily during installation.
Q2: What is a full threaded rod?
A full threaded rod is threaded along its entire length, allowing nuts to be fitted at any point on the rod. Unlike partially threaded studs, which are threaded only at the ends, full threaded rods offer greater flexibility for cutting and installation.
Q3: What sizes and grades does threaded rod come in?
Common metric sizes include M6, M8, M10, M12, M16, and M20. Threaded rods are available in mild steel, high-tensile steel, and stainless steel grades, with galvanized and other protective finishes. Detailed size, length, and grade specifications are available in the catalogue or on request from Ashish International.
Q4: What is a threaded anchor rod?
A threaded anchor rod is a threaded rod used together with an anchor system to secure equipment, brackets, or structures into concrete or masonry. One end is fixed into the anchor while the other end accepts a nut, providing a strong and adjustable fixing method.
Q5: Can you manufacture custom or white-label threaded rod?
Yes. Ashish International offers OEM and white-label manufacturing services, producing threaded rods in custom sizes and lengths under the client’s own brand and NDA, with full protection of customer intellectual property.
