How May I help you?
Fill in your details below, and we’ll be in touch with you soon.
Anchor Fastener Bolt
Premium Quality Anchor Fastener Bolt Collection – Ashish International
Anchor Fastener Bolt Manufacturer & Supplier India
An anchor fastener bolt is a fastener used to fix structures, machines, and supports firmly into concrete or masonry. It is simply another name for an anchor bolt a bolt that grips inside concrete and resists pulling, shaking, or lifting forces, then takes a nut to clamp down the part being fixed. Anchor fastener bolts are essential in construction and industry, holding steel columns, machine bases, MEP supports, and solar frames securely in place. They come in several types cast-in foundation bolts and expansion anchors such as wedge, sleeve, and pin-type and in many sizes and steel grades to match different loads. Made from mild or stainless steel with rust-resistant finishes, they give a strong, lasting hold. Ashish International is an anchor fastener bolt manufacturer and exporter based in Ludhiana, India, with over 25 years of experience producing bolts and support fittings to global quality standards. The right anchor fastener bolt keeps your structure or equipment safely secured.
What is an anchor fastener bolt?
An anchor fastener bolt is a bolt designed to fasten something to a concrete or masonry base. Unlike a normal bolt that joins two metal parts, its job is to grip into concrete and hold a load against forces that try to pull it out or lift it up. It usually has a threaded end for a nut and washer, so the part being fixed can be clamped down tightly. Anchor fastener bolts are part of the wider industrial fasteners family, working with nuts, washers, and studs. You can see the full range of bolts and fittings on the Ashish International products page. They matter because they are often the single fixing holding a heavy structure or machine safely in place. For example, a vibrating pump is bolted to its concrete base with anchor fastener bolts so it cannot shift during use. An anchor fastener bolt fastens structures, machines, or supports firmly into concrete or masonry.
Is an anchor fastener bolt the same as an anchor bolt?
Yes an anchor fastener bolt and an anchor bolt are the same thing, just described with different words. Both names point to a fastener that anchors a load into concrete or masonry. You may also see the term bolt type anchor fastener, which simply means an anchor fastener that is shaped and used like a bolt, with a thread and a nut. The slightly different names exist because buyers and suppliers describe the same product in different ways. What matters is the job it does and how it grips. Some anchor fasteners are cast into wet concrete, while others use a threaded anchor rod or expand inside a drilled hole, and all of them pair with nuts, washers, and other fasteners to complete the fixing. For example, a buyer asking for an “anchor bolt” and one asking for an “anchor fastener bolt” usually want the very same part. An anchor fastener bolt is the same as an anchor bolt a bolt-type fastener that grips into concrete.
What types of anchor fastener bolt are there?
There are several anchor fastener bolt types, and the right one depends on whether the concrete is new or already set. Cast-in foundation bolts such as J-bolts and L-bolts are placed into wet concrete, which hardens around their bent ends to give the strongest, most permanent hold; they are common under steel columns and machine bases. Expansion anchors are fitted into drilled holes in cured concrete: a wedge anchor grips when a wedge clip expands, a sleeve anchor uses an expanding sleeve, and a pin-type anchor locks with a hammer-set pin for quick fixing. Chemical or adhesive anchors use a resin and a stud for very high loads or close edges. Many of these can be made as custom fabricated parts for special jobs, and all are used to secure equipment, base plates, and strut channel supports. For example, a steel column uses a cast-in bolt, while a wall bracket on existing concrete uses an expansion anchor. Anchor fastener bolt types include cast-in foundation bolts and expansion anchors like wedge, sleeve, and pin-type.
What sizes does an anchor fastener bolt come in?
Anchor fastener bolts come in a wide range of sizes, and getting the size right is critical for a safe fixing. The main measurements are the bolt’s diameter (thread size), its length, and the depth it sets into the concrete. Common diameters run from around M6 up to M24 and larger, with bigger diameters carrying heavier loads. Length matters because the bolt must reach deep enough into the concrete to grip properly — too shallow, and it can pull out. The thread size must also match the nut and the part being fixed, so fittings like strut brackets and base plates sit tight. Ashish International produces anchor fastener bolts in a range of sizes, lengths, and grades, with exact anchor fastener bolt sizes, load figures, and hole requirements listed in the catalogue or shared on request. You can also see real fixings in the product application gallery. For example, a heavy machine base needs a larger-diameter, deeper-set bolt than a light wall bracket. Anchor fastener bolt sizes vary by diameter, length, and embedment depth, matched to the load.
How to choose an anchor fastener bolt manufacturer?
Choosing the right anchor fastener bolt and maker is important, because these fixings often carry safety-critical loads. First, match the bolt to the job cast-in for new concrete, expansion anchors for existing concrete and select the correct diameter, length, and grade for the load. Get the embedment depth right, since an undersized or shallow anchor can fail. Next, choose the material and finish: galvanized mild steel for general use, or stainless steel for damp or corrosive sites. Quality is critical, so look for anchor fastener bolt manufacturers that match the strength and accuracy of established global brands, run a certified, quality-controlled facility, and back their products with proper quality assurance. A reliable maker should also supply matching nuts, washers, and fittings, and handle bulk or urgent orders. Finally, ask about custom or white-label production for special bolts or your own brand. For example, foundation bolts for a structure are often made to the project’s exact drawing. Choose anchor fastener bolts by type, size, grade, and a manufacturer with proven quality control.
Why choose Ashish International for anchor fastener bolts?
Ashish International has manufactured and exported anchor fastener bolts, foundation bolts, and MEP support systems for over 25 years, building products to the same standards expected from leading global brands with the shorter lead times and value of Indian manufacturing. The company produces anchor bolts in mild and stainless steel, along with the full range of channel, brackets, clamps, and fasteners, so customers can source a complete fixing and support system from one maker including the cantilever arms, solar mounting frames, and steel fixings like beam clamps that anchors work with. Its in-house manufacturing keeps quality tight and handles both bulk and urgent requirements. Ashish International also offers white-label and OEM production, making anchor fastener bolts to a client’s own drawing, size, and brand under strict NDA a service trusted by many long-standing customers, several with more than 20 years of association. Its products are also sold under its own brand, FITSTRUTS®. With exports to Europe, the UK, the USA, Australia, the Middle East, and beyond, the company pairs global quality with competitive Indian pricing. Learn more about Ashish International and its experience. Ashish International offers global-standard anchor fastener bolts, a full support range, and trusted white-label manufacturing.
Need anchor fastener bolts for your structure, machine, or solar project? Ashish International manufactures a complete range in mild and stainless steel, in multiple types and sizes, with custom and white-label options. Contact our team and request a quote today call +91-99888-54380 or email ashishint2001@gmail.com.
Frequently Asked Questions
Q1. What is an anchor fastener bolt?
An anchor fastener bolt is a bolt-type fastener that fixes structures, machines, and supports into concrete or masonry. It grips inside the concrete to resist pulling and lifting forces and takes a nut to clamp down the part being fixed.
Q2. Is an anchor fastener bolt the same as an anchor bolt?
Yes. “Anchor fastener bolt,” “anchor bolt,” and “bolt type anchor fastener” all describe the same product — a fastener that anchors a load into concrete. The names vary, but the part and its job are the same.
Q3. What types of anchor fastener bolt are there?
The main types are cast-in foundation bolts (J-bolts and L-bolts set into wet concrete) and post-installed expansion anchors fitted into drilled holes, including wedge, sleeve, drop-in, and pin-type anchors, plus chemical anchors for high loads.
Q4. What sizes do anchor fastener bolts come in?
They come in a range of diameters, commonly from around M6 up to M24 and larger, in various lengths and embedment depths to match the load. Exact sizes and load figures are available in the catalogue or on request.
Q5. Can you manufacture custom or white-label anchor fastener bolts?
Yes. Ashish International offers OEM and white-label manufacturing, producing anchor fastener bolts to a client’s own drawing, size, and brand under NDA, with full protection of customer intellectual property.
