How May I help you?
Fill in your details below, and we’ll be in touch with you soon.
8mm Threaded Rod
Durable and Precision-Engineered 8mm Threaded Rods at Ashish International
8mm Threaded Rod Manufacturer & Supplier in India
An 8mm threaded rod is a straight steel rod, 8 mm in diameter, with a thread cut along its full length so a nut can be turned on at any point. It is also called M8 threaded rod, M8 studding, or all-thread, and it is one of the most common rod sizes used to hang, fix, and support things in building and industrial work. You cut it to length, add nuts and washers, and use it to hang pipes, ducts, cable trays, and equipment from ceilings, or to join and anchor parts. An 8mm threaded rod comes in mild or stainless steel, in different strength grades and finishes, and in standard lengths. Ashish International is an 8mm threaded rod manufacturer and exporter based in Ludhiana, India, with over 25 years of experience producing rods and fasteners to global quality standards. The right 8mm threaded rod gives a strong, adjustable fixing for many support jobs.
What is an 8mm threaded rod?
An 8mm threaded rod is a length of round steel bar, 8 mm across, with a continuous thread running its whole length. The “8mm” is the nominal (outside) diameter, and the standard thread is M8, usually with a coarse pitch. Because the thread runs end to end, a nut and washer can grip at any point, which lets you set the exact length and position you need. It is often called M8 studding or all-thread, and it is part of the threaded rod range, working with the nuts and fittings shown on the Ashish International products page. It matters because it is a simple, low-cost, adjustable way to hang and fix things. For example, a length of 8mm rod hung from a ceiling holds a pipe clamp at the exact height needed. An 8mm threaded rod is an M8 steel rod threaded along its full length for nuts at any point.
What is the weight of an 8mm threaded rod per metre?
A common question is the 8mm threaded rod weight per meter, because it helps work out load and shipping. As a rough guide, a mild steel M8 threaded rod weighs about 0.3 kg per metre — roughly 0.30 to 0.33 kg/m — though the exact figure changes a little with the thread pitch, the standard, and the material. Stainless steel weighs close to this, while the thread valleys make a threaded rod a little lighter than a solid 8 mm bar. Knowing the weight helps when you plan how much rod to order and how many matching nuts and washers and channel nuts go with it. Because the precise weight depends on the exact specification, the confirmed weight per metre for each grade and finish is given on the product datasheet or on request. For example, a 3-metre length of M8 rod weighs around one kilogram. An 8mm threaded rod weighs roughly 0.3 kg per metre, with exact figures on the datasheet.
What grades, materials, and lengths does 8mm threaded rod come in?
An 8mm threaded rod comes in different materials, strength grades, and lengths, so you can pick the right one for the load and conditions.
Materials and finishes
Most 8mm rod is mild steel, supplied self-colour (plain), zinc-plated, or galvanized to resist rust. Stainless steel rod is used in damp, coastal, or chemical areas where rust resistance matters most. The finish is chosen to suit where the rod is used.
Strength grades
Mild steel rod (such as grade 4.6 or 4.8) suits general support jobs, while high-tensile rod (such as grade 8.8) is used where a stronger rod is needed. Stainless grades like A2 and A4 give corrosion resistance. A higher grade carries more load.
Standard lengths
8mm rod is usually supplied in standard lengths often 1 metre or 3 metre studding and can be cut to size on site or made to a custom length. It pairs with strut channel and hangers to build supports. The exact grades, finishes, and lengths in stock are listed in the catalogue.
8mm threaded rod comes in mild or stainless steel, several grades, and standard or cut lengths.
Where is 8mm threaded rod used?
8mm threaded rod is used wherever something needs to be hung, fixed, or adjusted, which makes it one of the most common items on building and industrial sites. Its biggest use is hanging services from ceilings: a rod drops down and holds pipe hangers, clevis hangers, and cable-tray supports at the exact height needed. It is fixed to the structure with a ceiling anchor or a beam clamp, and works with cantilever arms and channel to build trapeze supports. It is also used to join parts, make stand-offs, and assemble frames, with a nut at each end. Because it can be cut and adjusted, one size of rod suits many jobs. The right grade keeps the support safe for its load. For example, a row of pipes hangs from 8mm rods dropped from the ceiling. 8mm threaded rod is mainly used to hang pipes, trays, and equipment from ceilings and structures.
How much does 8mm threaded rod cost?
The price of 8mm threaded rod depends on several things, so there is no single fixed rate. The main factors are the material (mild steel costs less than stainless steel), the grade (high-tensile costs more than standard mild steel), the finish (plain, zinc-plated, or galvanized), the length, and the quantity ordered, since bulk orders usually cost less per piece. Because of this, the best way to get an accurate 8mm threaded rod price is to request a quote for the exact grade, finish, length, and quantity you need. When comparing prices, check the grade and finish, because a cheaper rod may be a lower grade or have a lighter coating that does not last as long. Quality is important for a rod that carries loads, so look at strength and finish, not price alone. A certified, quality-controlled facility and proper quality assurance help ensure each rod meets its specification. For example, a stainless rod costs more than a plain mild steel one. 8mm threaded rod price depends on material, grade, finish, and quantity, so weigh quality against rate.
Why choose Ashish International for 8mm threaded rod?
Ashish International has manufactured and exported threaded rod, fasteners, and MEP support systems for over 25 years, building products to the same standards expected from leading global brands with the shorter lead times and value of Indian manufacturing. Among 8mm threaded rod manufacturers, the company makes rod in mild and stainless steel, in different grades and finishes, along with the nuts, washers, channel, and hangers it works with so customers can source rod and a complete support system from one maker. It can supply standard lengths or cut to size, and also makes anchors and foundation bolts for fixing into concrete. Its in-house manufacturing keeps quality tight and handles both bulk and urgent requirements. Ashish International also offers white-label and OEM production, making threaded rod to a client’s own grade, length, and brand under strict NDA a service trusted by many long-standing customers, several with more than 20 years of association. Its products are also sold under its own brand, FITSTRUTS®. With exports to Europe, the UK, the USA, Australia, the Middle East, and beyond, the company pairs global quality with competitive Indian pricing. Learn more about Ashish International. Ashish International offers global-standard 8mm threaded rod, a full support range, and trusted white-label manufacturing.
Need 8mm threaded rod for hangers, supports, or assembly? Ashish International manufactures M8 threaded rod in mild and stainless steel, in standard or cut lengths, with custom and white-label options. Contact our team and request a quote today call +91-99888-54380 or email ashishint2001@gmail.com.
Frequently Asked Questions
Q1. What is an 8mm threaded rod?
An 8mm threaded rod is a steel rod 8 mm in diameter with a thread running its full length, also called M8 studding or all-thread. It takes M8 nuts and washers at any point and is used to hang and fix pipes, trays, and equipment.
Q2. How much does an 8mm threaded rod weigh per metre?
A mild steel M8 threaded rod weighs roughly 0.3 kg per metre (about 0.30–0.33 kg/m), varying slightly with the thread, standard, and material. The exact weight per metre for each grade and finish is given on the product datasheet.
Q3. What grades and lengths does 8mm threaded rod come in?
It comes in mild steel (such as grade 4.6 or 4.8), high-tensile (grade 8.8), and stainless steel (A2 or A4), with plain, zinc-plated, or galvanized finishes. Common lengths are 1 metre and 3 metre studding, with cut and custom lengths available.
Q4. How much does 8mm threaded rod cost?
The price depends on the material, grade, finish, length, and quantity, so there is no single fixed rate. For an accurate figure, request a quote for the exact grade, finish, length, and quantity you need.
Q5. Can you supply custom or white-label 8mm threaded rod?
Yes. Ashish International supplies 8mm rod in standard or cut lengths and offers OEM and white-label production to a client’s own grade, length, and brand under NDA, with full protection of customer intellectual property.
